DEVELOPMENT, PRODUCTION,
SALE OF MEDICAL EQUIPMENT

česká verze

phototherapy unit FL-2010

ALFAMEDIC s.r.o.
Tř. 5. května 458
373 72 Lišov
CZECH REPUBLIC

tel.: +420 387 994 664
fax: +420 387 994 603

 alfamedic@alfamedic.cz

lefleat download

FL - 2010

is the next generation of high intensive phototherapy, it is designed using advanced LED technology. Compact LED modules are used as the irradiance sources.  They are equipped with special optics, which increase the intensity of irradiance, providing estimated life up to 30,000 hours without replacement of the LED modules. The irradiance does not affect the temperature of the patient.

The device is controlled by a microprocessor and touch screen LCD display. For maximum patient safety the device is supplied with a monitor of the patient temperature. When the temperature exceeds the threshold of 38,5 °C, the acoustic signal is switched on. In 1 minute, if the problem with high temperature is not solved by staff, the device turns off automatically.

The device is also equipped with a timer, which gives the possiblity to set the duration of therapy. After the specified period, the device turns off automatically and informs  staff  with the acoustic signal.

Built-in counter of worked hours informs staff about the upcoming service control of the device.

The lamp is available in two versions: as a standard phototherapeutic lamp for the incubator, or a lamp on a mobile stand with the vertically and horizontally adjustable lighting head.

 

Technical data: 

 

Irradiance source:      high-power LED modules

Wavelength:         450 - 470 nm

Irradiance level:           more than 60 μW/cm-2/nm-1  

Estimated life:         minimum 30 000 hours

Illuminated area:           600 x 300 mm

Timer:              yes - from 10 minutes to 24 hours

Temperature monitor:        yes – skin sensor - accuracy ± 0,1 °C

Signal:             yes - when the temperature exceeds 38,5 °C

Height setting:             mobile stand, 125 - 175 cm

Working heights of the device:  45 - 90 cm from the bed surface

Supply voltage:             110 - 230 VAC  50 - 60 Hz

Power consumption:      maximum 150 W

Device class:           II A

Dimensions of lamp:     520 x 185 x 100 mm

Weight of the device

without the stand:      7 kg